Error Tones
The phone provides an error tone when you make an invalid selection. You can disable the error
tone if required.
Procedure
1. Press the button. On 9621/9641 phones, select Settings.
2. Use the cursor keys to select Options & Settings.
3. Use the cursor keys to select Audio.
4. Use the cursor keys to select Error tones.
5. When completed, press Save.
6. Press Back/Exit to exit the menus.
Related links
Volume and Sound on page 146
Ringer Volume
You can adjust the ringer volume while the phone is idle or while it is ringing.
Procedure
1. With the phone idle or ringing, use the + plus and – minus keys to adjust the volume.
2. Once you stop adjusting the volume, the display returns to normal after a few seconds.
Related links
Volume and Sound on page 146
Handset Volume
Whilst talking, you can adjust the volume of the incoming call. The volume is adjusted separately
for whichever device is in use (handset, headset or speaker).
Procedure
1. With the call connected, use the + plus and – minus keys to adjust the volume.
2. The display returns to normal after a few seconds.
Related links
Volume and Sound on page 146
Error Tones
April 2020 9600 Series Phone User Guide 147
Comments on this document? infodev@avaya.com
To Next Page
Loading...
