31
TRANSMISSION MODE: Sending an image only of the channel that
triggered the alarm when an alarm event is triggered.
IP NOTIFICATION: Enable/disable sending e-mail when the IP address
of your DVR is changed.
EVENT ALARM: Enable/disable sending e-mail reports on the channel
that triggered the alarm when an alarm event is triggered.
MAIL TO: Enter the appropriate email address to enable sending e-mail
reports using a virtual keyboard.
MAIL SERVER: Enter the appropriate mail server information to enable
sending daily e-mail reports using a virtual keyboard.
ID: To set the connection user ID for the mail server using a virtual
keyboard.
PASSWORD: To set the connection password for the mail server using a
virtual keyboard.
MAIL FROM: To set the mail address sent to the destination host using a
virtual keyboard.
NTP
NTP is an abbreviation for Network Time Protocol, which is for
synchronizing the clocks of computer systems over variable-latency data
networks.
To Next Page
Loading...