Normal Startup Sequence 2-3
The alignment state is updated during that process to provide
information on alignment status and indications of completeness.
While early taxi is permitted prior to alignment for flexibility,
Avidyne highly recommends that the aircraft remain stationary
until the alignment of all AHRS are complete and the alignment
boxes are replaced by the ADI.
Until an initial fuel state has been entered, all other bezel controls
for the MFD are locked out. In other words, until an initial fuel
value has been entered via one of the labeled line select keys
along the right side of the bezel or via the right hand knob, no
other pages or tabs can be accessed on the display.
Note: It is critical that you accurately enter the amount of usable
fuel on board, so as to ensure the accuracy of the fuel totalizer
and fuel range ring functions. The image below describes the fuel
entry options.
Fuel entry options
To Next Page
Loading...
