6-2 Arrivals / Approaches / Landing
6 Arrivals/Approaches/Landing
Arrivals/Approaches/Landing
Avidyne recommends that you enter the arrival and approach for
the destination airfield, and alternates into the FMS flight plan.
Selecting a published arrival and/or approach will automatically
load the procedure including all altitude constraints into the
FMS900w.
Take advantage of the system to stay ahead of the airplane by
using the Baro knob to set system altimeter setting, using the
wind vector for arrival planning, and the electronic checklists and
various map views.
ENROUTE DESCENTS
A top of descent marker (TOD) is drawn on the map, giving a
clear visual cue when it is appropriate to begin the enroute
descent. It is based on the vertical constraint associated with a
downpath waypoint.
Top of Descent Marker
To Next Page
Loading...
