Turn on and turn off vehicle
Emergency unlock
The smart key contains a mechanical key which is
used in emergency situations. If the smart key runs
out of battery or fails due to other faults, remove the
mechanical key and open the door as follows.
1. Press the release button ①.
2. Pull out the mechanical key ②.
3. Pull up the driver's side door handle and push the
cover with your fingers from inside the handle to
remove it;
● Be sure to put the mechanical key back after
using it.
4. Rotate the door latch cylinder counterclockwise
to unlock and clockwise to lock.
● After locking the door with the smart key,
unlock and open the door with a mechanical
key, the vehicle will enter the alarm state. At
this point, place the smart key in the center
console armrest storage box with emergency
start identification and press the Start/Stop
button to deactivate the alarm.
To Next Page
Loading...
