Locking door with mechanical key emergency
lock
When the vehicle is powered off, the left front door
lock is locked by the mechanical key, and the other
three doors and the liftgate are locked by the door
lock with their own emergency locks.
1. Remove the mechanical key;
2. Open the door, insert the mechanical key into the
emergency locking switch, rotate the left rear
door lock counterclockwise, and rotate the
liftgate, right rear and right front door lock
clockwise to lock the door lock;
3. Close the door.
Replace the battery
When the smart key power is low, the trip computer
will display "low power of smart key" to remind the
replacement of the battery.
When replacing the battery, open the battery cover on
the key, as improper operation can easily damage the
key. Therefore, it is recommended that the
replacement be entrusted to the authorized dealership
of BAIC ORV.
● Be careful not to touch the circuit, otherwise
static electricity may be generated, which
may damage the smart key.
● When replacing the battery of the key, be
careful not to lose any components.
● Only use the same or equivalent battery
recommended by BAIC ORV.
● Dispose of used batteries in accordance with
local laws.
● Ensure that the positive and negative
terminals of the smart key cell are installed
correctly.
● Do not replace the battery of the smart key
with wet hands, as water can cause the
battery to rust.
● Do not touch or move any components of the
smart key, as it will affect the functionality
of the smart key.
● Be careful not to bend the electrodes when
inserting the smart key cell, and do not allow
dust or oil stains to stick to the battery box.
To Next Page
Loading...
