Please follow the following steps to replace the key
battery:
1. Press the backside mechanical key switch to
remove the mechanical key;
2. Open the rear cover of the key along the
mechanical key slot.
3. Open the battery cover with a sharp tool;
4. Remove the battery to avoid contacting the circuit
board and battery clamps;
5. Avoid touching the battery surface when
installing the battery and wipe the battery clean
before installation;
6. Ensure that the battery cover is fully engaged
during installation to avoid dust and moisture
from entering;
7. After the battery is replaced, it is necessary to test
whether the function of the smart key is normal.
If the smart key still does not work properly,
please contact the authorized dealership of BAIC
ORV.
To Next Page
Loading...
