17
www.balluff.com
2
Setup
Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
2Setup
2.1 Unpacking Check carefully to ensure the reader and any accessories ordered are present and undamaged. If
any damage occurred during shipment, contact Balluff Technical Support. Information is shown
on page 12.
KEEP THE PACKAGING. Should the unit ever require service, it should be returned in its original
shipping container.
2.2 Setting Up the
Reader
Follow the steps below to connect and get your reader up and communicating with its host.
1 Begin by Installing the Interface Cable (Corded) or Connecting the Base Station (Bluetooth)
2 Configure Interface Settings (see page 24).
3 Configure the Reader starting on page 26 (optional, depends on settings needed)
Connect the handheld reader by plugging directly into the host device as shown. The power can
also be supplied through an external power supply via the Interface Cable supplied with a power
jack.
To Next Page
Loading...