21
www.balluff.com
2
Setup
Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
Mounting the
Metal Plate
1 Affix the metal plate onto the desired mounting surface using the two center screw holes (see
Figure 4 on page 21).
2 Remove the adhesive strips protecting the mounting tabs on the cradle, shown in Figure 3.
3 Slide the tabs on the back of the cradle onto the metal plate as shown in Figure 4:.
4 After aligning the tabs, push up to lock into place.
Figure 4: Mounting Plate on Wall
To Next Page
Loading...