Balluff BVS HS-P Series User Manual

28
2
Setup
Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
2.7 Linking the
Reader
2.7.1 LinkWireless
Devices to Base
For Wireless devices, before configuring the interface it is necessary to link the handheld with the
base.
To link the handheld and the base, press the trigger to wake up the handheld and mount it into
the base. If the reader was previously linked to another base, you must first press and hold the
button on the base (>5 seconds), then scan the Unlink barcode before re-linking to the new
base.
2.7.2 Linking to a
Bluetooth
Adapter in Serial
Port Profile
(Slave) Mode
1 Install any drivers provided with the Bluetooth adapter.
2 Scan the Enable RF Link to Server label below to make the reader visible to the host com-
puter.
3 Use the host computer’s Bluetooth manager to “Discover new devices” and select "Balluff
reader." If you receive an error message, it may be necessary to disable security on the device.
4 Use an RS-232 terminal program to see incoming data on the port designated by the com-
puter's Bluetooth manager.
2.7.3 Linking to a
Bluetooth
Adapter in Serial
Port Profile
(Master) Mode
1 Ensure the PC or terminal can network with Bluetooth devices and that it is powered on.
2 Ensure that a COM port is assigned under Services in the Bluetooth setup menu.
3 Create a Link label that contains the address of the PC Bluetooth adapter.
The link label is a Code 128 function 3 label with the following format:
<FN3 char>LnkB<12 character Bluetooth address>
4 Scan the link label you created in step 3.
2.7.4 Linking to a
Bluetooth
Adapter in HID
mode
1 Install any drivers provided with the Bluetooth adapter.
2 Scan the Link to PC in HID label below.
3 Use the host computer’s Bluetooth manager to “Discover new devices” and select "Balluff
reader." If you receive an error message, it may be necessary to disable security on the device.
4 Use a text editor to see incoming data on the port designated by the computer's Bluetooth
manager.
Unlink
Enable RF Link to Server
NOTE
The Bluetooth address can be found under “Properties” within the Bluetooth
setup menu.
Link to PC in HID

Balluff BVS HS-P Series Specifications

General

Brand	Balluff
Model	BVS HS-P Series
Category	Barcode Reader
Language	English