Barco DP2K-E series

13. Lamp House
13.1 Introdu ction
Lamp House
The DP2K-E s eries projector is delivered with two Lamp Hous es installed. The Lamp House is a c onsum able item of the projector.
For a b etter user experience, it is recommend ed t o replace both Lam p Modules at the same time.
Lamp st rike policy and lamp warning/error policy versus the lamp runtime
• The projec tor issues a lamp run time notification m ess age (and have blue status LE Ds) approximately 30 hours before the
maximum lamp runtime occurs.
• T he projector issues a lamp run time notification mes sage (and have blue status LED s) when the m aximu m lamp runtime
occurs.
• The projector will always tries to strike the lamp, independent of the lamp runtime.
Parts identific ation Lamp House
1
1
1
2
5
5
4
3
3
Image 13-1
1 Retaining screws for fixation of the Lamp House
2 Handle
3 Power cable connections
4 UV/IR blocker
5 Positioning pins
100 R5906693 DP2K-E SERIES 19/06/2015