Barco DP2K-E series

9. Communicator Touch Panel
9. COMMUNICATOR TOUCH PANEL
About this chapter
This chapter gives a short introduction of the Comm unicator Touch Panel, describes how to install the Communicator Touch Panel
interface onto the top of your DP2K -E series projector and how to connect the interface. Fo r operation instructions refer to the user
guide of the Com municator s oftware. The latest software version an d updated u ser guide for the Communicator can be downloaded
from h
ttps://my.barco.com.
The Communicator Touch Panel is not included in the package of the projector. An alternative for the Comm unicator Touch P anel
is the use of the C omm unicator for PC (Mac, Linux or Windows).
Overview
• Communicator Touch Panel
• Installing the Touch P anel interface
• Repositioning the Touch Panel interface
R5906693 DP2K-E SERIES 19/06/2015
69