7. Input & Communication
9
Star button
Star button (reference 9 image 7-2). User defined button. (Future expansion)
10
Key b utton
The (security) Key button (reference 10 im age 7-2) is used for the authorization procedure to clear tamper errors etc.
(service purposes). Pin codes can be added/changed with the Comm unicator.
11
Zoom button
The Zoom button (reference 11 image 7-2) allows you to zoom in or out the projected ima ge on the screen. T he backlight
color of the Z oom button is red in case the end of range is reached.
12
Media control buttons
Buttons (reference 12 image 7-2) allowing you to navigate through the content on the integrated media server. If a test
pattern is activated, the pr ojector will not show the content on the integrated media se rver.
Button backlight colors
• PU RPL E : The backlight color of a button (or part of) is purple when pushed. T his indicates that the requested a ction is ongoing.
The backlight color remains purple until the requested action is finish ed.
• GREEN : depending on t he button the green backlight color can have a different meaning:
- for the Standby button a green backlight color means that the lamp is switched ON .
- for the Sleep button a green backlight color means that the projector is awake.
- for the Dowser button a gr een bac klight color me ans that the electronic dow ser is o pen (applied source can be displayed).
- for the Test P attern button a green backlight color means that one test pattern is activated and thus the applied source can
be displayed.
- for the K ey button a green backlight color m eans that the projector is secured (no tamper event).
• RED : depending on the b utton the red backlight color can have a different meaning:
- for the S hift, Zoom or Focus button a re d backlight color indicates that the end of rang e is reached.
• YEL LO W : The backlight c olor of the Numeric buttons 1 to 6 of the Loc al Keypad changes from white t
o yellow if t he (security)
Key button is pressed.
• WHITE: depending on the button the white backlight color can have a different me aning:
- for the Standby button a white backlight color indicates that the lamp is OFF (not activated).
- for the Sleep button a white backlight color indicates that the projec tor is in Sleep m ode.
- for the Dowser button a w hite backlight color indicates that the electronic dowser is closed (applied source can not be dis -
played).
- for the Test Pattern button a white backlight color indicates that no test pattern is selec ted (applied source can be d isplayed).
- for the K ey button a white backlight color means that the projector is no t secured (tamper event).
42
R5906693 DP2K-E SERIES 19/06/2015
To Next Page
Loading...
