8. ICMP
Image 8-17
5. Switch on the projector.
In case y ou replace one HDD (e.g. degraded mode) the ICMP automatically starts with the RA ID recovery
process. The red LED of the HDD which has to be rebuilt is blinking. This process takes about 200 GB p er
hour. Once the RAID is completed the red LED turns off.
CAUTION: It’s strongly recomm ended to com plete the RAID recovery process prior to starting a show. This
to ensure that the content integrity is preserved and that the show is not interrupted.
R5906693 DP2K-E SERIES 19/06/2015 67
To Next Page
Loading...
Need help?
General
