11. Scheimpflug
If yes, the Back Focal Length is c orrectly adjusted.
If no, repeat with step 4.
9. Is the projected image in the c orners as sharp as in the m iddle?
If yes, proceed with the procedure "Fixation of the Lens Holder front plate", page 84.
If no, Scheimpflug adjustment is requ ired. See procedure "Scheim pflug adjustment", page 82, prior to fixate the Lens Holder
front plate. CAUTION: Skip the action, in the Scheimpflug adjustmen t procedure, to turn the three Scheimp flug adjustment nuts
until the front of the nut is equally aligned with the front of the threade d rod!
R5906693 DP2K-E SERIES 19/06/2015
89
To Next Page
Loading...
