Barco Encore - Page 114

114 Encore Presentation System • User’s Guide
4. Controller Orientation
Controller Sections
Delete — hold down Delete, then press the desired Preset button to delete that register
from memory.
S To delete preset 8 from memory, press Delete + 8.
Next — press to recall the next valid Preset in sequential order. Please note:
• If a Preset is undefined, it will be skipped when Next is pressed.
• Next includes the ability to “wrap” to the next page (e.g., from Preset 30 on page 2
to Preset 1 on page 3, or from Preset 30 on page 30 to Preset 1 on page 1).
Previous — press to recall the previous valid Preset in sequential order. Please note:
• If a Preset is undefined, it will be skipped when Previous is pressed.
• Previous includes the ability to “wrap” to the previous page (e.g., from Preset 1
on page 3 to Preset 30 on page 2, or from Preset 1 on page 1 to Preset 30 on
page 30).
Page — hold down Page, then press the desired Preset button to switch to that page of
Presets. The
Red LED above the button lights to indicate the selected page.
S To switch to page 7, press Page + 7.
In Chapter 7, refer to the “
Working with Presets” section on page 322 for complete
instructions on all Preset modes.
Delete
Next
Previous
Page