Encore Presentation System • User’s Guide 239
SK==póëíÉã=pÉ íìé
få=qÜáë=`Ü~éíÉê
This chapter provides comprehensive instructions for setting up the Encore system. The
following topics are discussed:
• Setup Prerequisites
• System Setup Sequence
• ID Setup and Remote Enable
• Peripheral Power Up and Status Check
• Return to Factory Default
• Touch Screen Calibration
• Programming EDID
• Restore from Flash Memory Card
• Router Setup
• D/A Setup
• Input Patching
• Destination Setup
• AUX Destination Setup
• Output Format Setup
• Sync Setup
• Genlock Setup
• Projector Setup
• Background Setup
• Input Setup
• DSK Setup
• Saving the Setup
• Backup to Flash Memory Card
Note
Once you have reviewed all of the sections in this chapter,
please continue with Chapter 7, “
Operations” on page 279.
To Next Page
