Encore Presentation System • User’s Guide 361
`K==réÖê~ÇáåÖ=pçÑíï~êÉ
Downloading Software
açïåäç~ÇáåÖ=pçÑíï~êÉ
Two different methods can be used to download Encore system software and the Flash File
Loader utility:
• Via FTP Site
• Via Web Site
sá~=cqm=páíÉ
Barco Folsom's FTP site address is: ftp.folsom.com
To download from the FTP site:
1. Create a target folder on your PC (e.g., Encore).
2. If you are using an FTP client, logon to our site as follows:
~ User name: anonymous
~ Password: your email address
S Example: johndoe@somecompany.com
If you are using a web browser to access our FTP site, point the browser to:
ftp://ftp.folsom.com
3.
Once logged on, navigate to the following directory:
ftp://ftp.folsom.com/Image Processing/Encore/
4.
Transfer the following file to the target folder on your PC:
EncoreSystem_SPII Controller_Rev###.EXE
5.
With the download complete, navigate to the target folder and double-click the
EXE to launch the installation shield.
6. Follow the prompts to install the upgrade package. At the conclusion of the
procedure, a new path will be created under
Start > Programs > Barco Folsom.
7. As required, please continue with the “Serial Upgrade Method” section on
page 362, or the “
Ethernet Upgrade Method” section on page 364.
sá~=tÉÄ=páíÉ
Barco's web site address is: www.barco.com
To download from the web site:
1. Create a target folder on your PC (e.g., Encore).
2. On the web, navigate to:
http://www.barco.com
3.
Navigate to the “Events” home page:
http://www.barco.com/events
4.
Log in to the Barco Partnerzone.
5. Navigate to the “Software Updates” link, and download the latest version of
Encore software.
To Next Page
Loading...
