Encore Presentation System • User’s Guide 277
6. System Setup
Saving the Setup
p~îáåÖ=íÜÉ=pÉíìé
Encore system setup: Step 19
When all system setup procedures have been complete, press SAVE in the System
Keypad
. This action saves the state of the Controller in non-volatile memory.
Once pressed, the Touch Screen menu reads “
Saving System Configuration.” If you
cycle power, the Controller will return to its state at the time of the “save.”
19
Note
Automatic "Saves" occur as necessary, for example, when
you change output resolutions.
To Next Page
Loading...
