Encore Presentation System • User’s Guide 193
5. Menu Orientation
Status Menu
pí~íìë=jÉåì
The Status Menu provides basic system status information:
Figure 5-48. Status Menu (sample)
To access the Status Menu:
• Press STATUS in the Keypad Section, or press {STATS} from various menus
(such as the
Key Menu).
The following status information is provided:
• VER x.xx — displays the Controller’s current software version.
• Video Processors — lists the number of Video Processors detected.
• ScreenPRO-II — lists the number of ScreenPRO-II units detected.
• ScreenPRO-II — lists the number of PresentationPRO-II units detected.
• ImagePRO — lists the number of ImagePRO units detected.
• Routers — lists the number of Routers detected.
ENCORE SYSTEM STATUS
VIDEO PROCESSOR: 4
SCREENPRO II: 1
VER x.xx
PREPRO II: 1
IMAGEPRO: 2
ROUTERS: 2
Note
The Status Menu displays additional messages (such as
“
Checksum Mismatch” and “Please Upgrade”) if certain
error conditions exist.
To Next Page
Loading...
