338 Encore Presentation System • User’s Guide
7. Operations
Working with Frame Grabs
3. Press {DELETE} to delete the selected frame.
4. Repeat the procedure to delete additional frames.
(Standard Systems — Erase) Use the following steps to erase a saved frame.
1. On the Frame Grab Menu, select the frame store that you wish to erase.
2. Press {ERASE} to display the Frame Erase Menu.
3. Press {YES} to erase the selected frame. All front panel controls will be locked for
1 to 2 minutes.
4. Repeat the procedure to erase additional frames.
("ES" Systems — Delete) Use the following steps to erase a saved frame.
1. On the Frame Grab Menu, press {ERASE} to display the Frame Erase Menu.
2. On the Saved Location line, select the frame that you wish to erase.
3. Press {ERASE} to erase the selected frame.
4. Repeat the procedure to erase additional frames.
Note
The ADJ knob only scrolls through all frames, giving you
access to all 100 registers.
To Next Page
Loading...
