Barco ImagePRO - Page 55

R5906167 /00 ImagePRO–4K Video Processor
55
Image 6-34: Still menu: Select Still
2. Use the adjust knob to scroll through the stored stills and to select the desired still, for example
StillStoreHDMIInput1-2.
Set Selected as Logo
1. Select the still to be used as a logo.
2. Select Set Selected as Logo on the Still menu.
The system displays a message that says that the selected still has been set as a logo.
Image 6-35: Still menu: Still Set as Logo
Delete Selected
1. Select the still to be deleted.
2. Select Delete Selected on the Still menu.
The system displays a message that asks if you really want to delete the still.
Menu orientation