Barco Thor series Installation Manual

R5906788-03 Thor series152
3. Loosen the two captive thumbscrews of the side cover (reference 3 Image 16-4).
4. Remove the two screws located at the middle bottom of the side cover (reference 4Image 16-4). Use a 3 mm
Allen wrench.
5. Lift up the side cover about two centimeters and then remove it from the projector.
4
3
3
Image 16-4
Removal and installation of the projector covers

Barco Thor series Specifications

General

Brand	Barco
Model	Thor series
Category	Projector
Language	English