A: R82GB0FA.PMD
B: R82DE0FA.P65
E: 080403 / T. Weiß
G: 020304 / TCS
Section 5.5
Page 34
Operation and Control System
?
R8B2_GB103.JPG
R8B2_GB104.JPG
R8B2_GB105.JPG
R8B2_GB102.JPG
Specify the area to be protected, the gripper and
the auxiliary axes. The old values are shown on
the right.
Enter the end coordinates for the selected lock
area in this display.
Enable: Selected operating area ON or OFF.
Enter the start coordinates for the selected lock
area in this display.
To Next Page
Loading...