Baumuller b maXX 5000 Series - Page 146

1C1, 1D1 Connections for the DC link, see ZFigure 75– on page 158.
PE Power supply PE-connection
1U1, 1V1,
1W1
Power supply connection, see ZFigu
re 75– on page 158.
F1 Fuses (cable + device)
L1 Power choke
Z1 Line filter
K1 Main contactor
X101 Quick discharge R
D
+, R
D
-
X200 Connections for 24 V voltage supply; for additional information, see ZFigu
re 75– on page
158 (SELV/PELV).
X2 Connections for pulse enable, etc., see ZPin assign
ment X2– on page 174.
X300 Signal bus
BB-HS Ready for main contactor ON (NO contact)
BB-IF Ready for pulse enable (NO contact)
Connection diagrams
Instruction handbook b maXX 5000
Document No.: 5.09021.16 Baumüller Nürnberg GmbH
146
of 328
7.13