WARNING!
Danger arising from usage for an unintended purpose!
Any usage that goes beyond the intended purpose and/or any non-compliant use of
th
e device can lead to dangerous situations.
Therefore:
m Only
use the device compliant with its intended purpose.
m Obser
ve all specifications of these instruction handbook.
m En
sure that only qualified personnel work with/on this device.
m Whe
n configuring, ensure that the device is always operated within its specifica-
tions.
m M
ount the device on a wall that can sufficiently bear the load.
m T
he device must always be operated within a control cabinet.
m Ens
ure that the power supply complies with the stipulated specifications.
m T
he device may only be operated in a technically flawless condition.
m Only op
erate the device in combination with components approved by Baumüller
Nürnberg GmbH.
m The dev
ice has been developed in such a manner that it fulfills the requirements
of the category C3 according to IEC 61800-3:2012.
m T
he device is not intended to be connected to the public mains. To operate the de-
vice in primary surroundings of the catego
ry C2/C1 (residential, business and com-
mercial areas, directly on a pu
blic low-voltage mains without an intermediate
transformer), special measures to reduce the transient emissions (line-internal and
radiated) must be provided for and certifiable by the system builder. Otherwise,
EMC interference could occur without such additional measures.
Usage for the intended purpose
Instruction handbook b maXX 5000
Document No.: 5.09021.16 Baumüller Nürnberg GmbH
16
of 328
2.3
To Next Page
Loading...