52
Calibration Errors
If the calibration procedure cannot be completed successfully, an error message will be
displayed in the calibration wizard or status screen.
Figure 15 - Error displayed in calibration wizard
Figure 16 - Error displayed in ReadA status screen
See 6.4BDKiestra™ Optis™ error messages for a full list of possible Optis™ errors and
how to resolve them.
If an error is preventing successful completion of the camera calibration procedure, contact
BD.
NOTE
Calibration must be performed each time the camera is cleaned, or when the camera
housing is opened or closed.
BD Kiestra™ ReadA User's Manual
To Next Page
Loading...
