Bematech LR2000 - ESC $ Nl Nh

LR2000 Programming Manual V1.2
1
-
-
-
Undefined.
2
-
-
-
Undefined.
3
Off
00
0
Emphasized mode not selected.
On
08
8
Emphasized mode selected.
4
Off
00
0
Double-height mode not selected.
On
10
16
Double-height mode selected.
5
Off
00
0
Double-width mode not selected.
On
20
32
Double-width mode selected.
6
-
-
-
Undefined.
7
Off
00
0
Underline mode not selected.
On
80
128
Underline mode selected.
[Notes]  When both double-height and double-width modes are selected, quadruple-size
characters are printed.
 The printer can underline all characters, but cannot underline the space set by HT
or 90clockwise rotated characters.
 The thickness of the underline is that selected by ESC , regardless of the
character size.
 When some characters in a line are double or more height, all the characters in the
line are aligned at the baseline.
 ESC M can also select character font type. However, the setting of the last
received command is effective.
 ESC E can also turn on or off emphasized mode. However, the setting of the last
received command is effective.
 ESC can also turn on or off underline mode. However, the setting of the last
received command is effective.
 GS ! can also select character size. However, the setting of the last received
command is effective.
 Emphasized mode is effective for alphanumeric and Kanji. All print modes except
emphasized mode are effective only for alphanumeric.
[Default] n = 0
[Reference] ESC -, ESC E, GS !
ESC $ nL nH
[Name] Set absolute print position
[Format] ASCII ESC $ nL nH
Hex 1B 24 nL nH
Decimal 27 36 nL nH
[Range] 0 nL 255
0 nH 255