Bematech LR2000 - GS ^ R T M; GS a N

LR2000 Programming Manual V1.2
 The contents of the macro can be defined up to 2048 bytes. If the macro definition
exceeds 2048 bytes, excess data is not stored.
[Reference] GS ^
GS ^ r t m
[Name] Execute macro
[Format] ASCII GS ^ r t m
Hex 1D 5E r t m
Decimal 29 94 r t m
[Range] 0 r 255
0 t 255
m 0, 1
[Description] Executes a macro.
 r specifies the number of times to execute the macro.
 t specifies the waiting time for executing the macro.
 m specifies macro executing mode.
When the LSB of m = 0:
The macro executes r times continuously at the interval specified by t.
When the LSB of m = 1:
After waiting for the period specified by t, the PAPER OUT LED indicators blink
and the printer waits for the FEED button to be pressed. After the button is
pressed, the printer executes the macro once. The printer repeats the operation
r times.
[Notes]  The waiting time is t×100 ms for every macro execution.
 If this command is received while a macro is being defined, the macro definition is
aborted and the definition is cleared.
 If the macro is not defined or if r is 0, nothing is executed.
 When the macro is executed (m = 1), paper cannot be fed by using the FEED
button.
[Reference] GS :
GS a n
[Name] Enable/Disable Automatic Status Back (ASB)
[Format] ASCII GS a n
Hex 1D 61 n
Decimal 29 97 n
[Range] 0 n 255
[Description] Enables or disables ASB and specifies the status items to include, using n as follows: