LR2000 Programming Manual V1.2
Hex 1D 28 6B pL pH cn fn n
Decimal 29 40 107 pL pH cn fn n
[Range] pL = 3, pH = 0
cn = 48, fn = 70
n = 0 (standard PDF417)
[Description] Select option for PDF417.
GS ( k pL pH cn fn m d1 ... dk (cn=48, fn=80)
[Function] Store PDF417 data in the symbol storage area
[Format] ASCII GS ( k pL pH cn fn m d1 ... dk
Hex 1D 28 6B pL pH cn fn m d1 ... dk
Decimal 29 40 107 pL pH cn fn m d1 ... dk
[Range] 4 ≤ (pL + pH × 256) ≤ 65,535 (pL ≤ 255; pH ≤ 255)
cn = 48, fn = 80
m = 48
0 ≤ d ≤ 255
k = (pL + pH × 256) – 3
[Description] Store PDF417 symbol data (d1 ... dk) in the symbol storage area.
[Notes] • Data stored in the symbol storage area is processed by functions 81 and 82. This
data is not destroyed after execution of function 81 or 82.
• k bytes of d1...dk are processed as symbol data.
• Specify only the data codeword of the symbol with this function. The information
listed below is added automatically by the printer:
o Start pattern and stop pattern.
o Indicator codeword of left and right.
o The descriptor of symbol length (the first codeword in the data area).
o The error correction codeword calculated by modulus 929.
• Settings of this function are effective until the following processing is performed:
o Function 80 is executed.
o ESC @ is executed.
o The printer is reset or the power is turned off.
GS ( k pL pH cn fn m (cn=48, fn=81)
[Function] Print PDF417 symbol data in the symbol storage area.
[Format] ASCII GS ( k pL pH cn fn m
Hex 1D 28 6B pL pH cn fn m
Decimal 29 40 107 pL pH cn fn m
[Range] pL = 3, pH = 0
cn = 48, fn = 81
To Next Page
Loading...
