Bematech LR2000 - Page 55

LR2000 Programming Manual V1.2
1
－
－
－
Undefined.
2
Off
00
0
Double-width mode is OFF.
On
04
4
Double-width mode is ON.
3
Off
00
0
Double-height mode is OFF.
On
08
8
Double-height mode is ON.
4
－
－
－
Undefined.
5
－
－
－
Undefined.
6
－
－
－
Undefined.
7
Off
00
0
Underline mode is OFF.
On
80
128
Underline mode is ON.
[Notes]  When both double-width and double-height modes are set (including right- and left-
side character spacing), quadruple-size characters are printed.
 The printer can underline all characters (including right- and left-side character
spacing), but cannot underline the space set by HT and 90° clockwise-rotated
characters.
 The thickness of the underline is that specified by FS , regardless of the character
size.
 When some of the characters in a line are double or more height, all thecharacters
on the line are aligned at the baseline.
 It is possible to emphasize the Kanji character using GS !; the setting of the last
received command is effective.
 It is possible to turn underline mode on or off using FS , and the setting of the last
received command is effective.
[Default] n = 0
[Reference] FS , GS !
FS &
[Name] Select Kanji character mode
[Format] ASCII FS &
Hex 1C 26
Decimal 28 38
[Description] Selects Kanji character mode.
[Notes] For Kanji model:
 When the Kanji character mode is selected, the printer processes all Kanji code as
two bytes each.
 Kanji codes are processed in the order of the first byte and second byte.
 Kanji character mode is not selected when the power is turned on.
[Reference] FS .