Bematech LR2000 - Page 9

LR2000 Programming Manual V1.2
Type
Command
Name
ESC { n
Turn upside-down printing mode on/off
ESC - n
Set the underline dots(0,1,2)
ESC % n
Select/Cancel user-defined characters
FS &
Select Chinese mode
FS .
Select character mode
FS!
Set print mode for Kanji characters
FS-n
Turn underline mode on/off for characters
FS 2 c1 c2
Define user-defined Kanji characters
FS S n1 n2
Set left and right -side Kanji character spacing
ESC &
Define user-defined characters
ESC ? n
Cancel user-defined characters
ESC R n
Select and international character set
ESC t n
Select character code table
Bit Image
Command
ESC *
Select bit-image mode
GS *
Define downloaded bit image
GS /
Print downloaded bit image
GS v
Print the bitmap with width and height
FS p n m
Print NV bitmap
FS q n
Define NV bitmap
Init Command
ESC @
Initialize printer
Status
Command
DLE EOT n
Real-time status transmission
DLE ENQ n
Real-time request to printer
DLE DC4 n m t
Generate pulse at real-time
GS r n
Transmit status
ESC p m
Generate pulse
GS a n
Enable/Disable ASB
GS I
Read Print ID
GS ( H
Set process ID response
Bar Code
Command
GS H
Select printing position of human readable characters
GS h
Set bar code height
GS w
Set bar code width
GS f n
Select font for HRI characters
GS k
Print bar code