1.6.7 Motor Cables
Motor Cable connections are grouped in the top left corner of the Control Box cover. There are
ve Motor Cables connected to the Control Box. Powered Gate machines have a Powered
Gate Control Box with a separate C Drive motor cable. Ensure all Motor Cables are securely
inserted at their Control Box connections and that their retaining clips are in place. If it is
necessary to remove a Motor Cable it is critical to the operation of the machine that they be
re-connected in their respective socket. Failure to do this will result in improper function of the
machine and could possibly damage the machine.
1.6.8 Motor Location and Operation Index
1.6.9 Axis Sensor Cables
Motor Sensor cable connections are grouped in the top right of the Control Box cover. Ensure
all Motor Sensor cables are securely seated at their Control Box connections and that they
are tight. If it is necessary to remove a Motor Sensor cable it is critical to the operation of the
machine that they be re-connected in their respective socket. Failure to do this will result in
improper function of the machine and could possibly damage the machine.
Axis Location Operation
X Trolley Moves Trolley forward/backward
Y Chuck Rotates chuck clockwise/counter clockwise
Z Tool Head Moves Tool Head left/right
A Tool Head Moves Tool Head up/down
B Material Support Raises/lowers material support
C Front Gate Rotates Front Gate clockwise/counter-clockwise
! Warning !
Ensure the Main Power Switch is o (O) before handling Axis Sensor Cables.
18 Bend-Tech Dragon A400
Start-Up and Training
Setup Inspection
01
To Next Page
Loading...
