37Bend-Tech Dragon A400
Start-Up and Training
Machine Walk Through
02
2.6 Motor Cable Connections
Motor Cable Connections achieve connection between Motor Cables, machine Axes and the
Control Box.
2.6.1 Motor Cable Connection Overview
The majority of Motor Cable Connections are performed at the Bend-Tech manufacturing
facility. Homing Sensor Cable Connections are also performed at the Bend-Tech manufacturing
facility. However, it is necessary for the Customer to connect the cables for the X Axis and Y
Axis motors when the Dragon A400 is initially assembled. The X Axis and Y Axis connectors
are located on the Trolley.
X Axis Motor
Connection
Y Axis Motor
Connection
To Next Page
Loading...
