40 ATICS-2-ISO_D00046_04_M_XXEN / 03.2021
Mounting and connection
4.2.8 Connection example: ATICS® with ATICS-ES energy storage device
I
Caution! Risk of destruction if connected incorrectly.
The terminals marked with "*" are intended for Bender-internal purposes only. If this is ignored, the
ATICS® automatic transfer switching and monitoring device may be damaged.
Power supply for the ATICS-ES energy storage device
The AN412 power supply unit with order number B924150 must be used as power supply unit for the
ATICS-ES energy storage device (highlighted in yellow)!
To Next Page
Loading...