ATICS-2-ISO_D00046_04_M_XXEN / 03.2021 77
ATICS-2-63A-ISO
Menu Description
Exit Exit settings menu "Datalogger"; go up one menu level
1. Modific. Once the measured value has been changed by the set % value,
a new measured value is stored in the data logger.
Setting range: 0 … 100 %
Resolution of setting: 1 %
2. Overwrite yes Once the maximum number of measured values which can be
saved has been reached, the current measured value overwrites the oldest
entry.
no Once the maximum number of measured values which can be
saved has been reached, no further measured values are saved.
3. Delete Delete Clear data logger
Cancel Do not clear data logger.
7.3.4.8 Settings menu 8: Language
Select the language for the menus and the messages to be displayed (alarm and operating messages)
of the device.
Menu Description
Exit Exit settings menu "Language"; go up one menu level
1. English
Select language. Changes take effect immediately.
2. Deutsch
3. Français
4. Polski
7.3.4.9 Settings menu 9: Interface
To Next Page
Loading...