21
MK2430_D00129_02_M_XXEN/09.2019
4. Installation and connection
4.1 Safety instructions
Only qualified personnel are permitted to carry out the work necessary to
install, commission and run a device or system.
Risk of fatal injury due to electric shock!
Touching live parts of the system carries the risk of:
An electric shock
Damage to the electrical installation
Destruction of the device
Before installing and connecting the device, make sure that the
installation has been de-energised. Observe the rules for working on
electrical installations.
Refer to the rated and supply voltage values as specified in the
technical data!
To Next Page
Loading...
