Need help?Do you have a question about the Bender COMTRAXX MK2430 and is the answer not in the manual?
General| Brand | Bender |
|---|---|
| Model | COMTRAXX MK2430 |
| Category | Measuring Instruments |
| Language | English |
Guide on how to navigate and understand the manual's structure and symbols.
General safety regulations and precautions for using Bender devices.
Specifies that only qualified personnel can perform installation and commissioning.
Details the purpose and application of the MK2430 in medical locations and other buildings.
Description of the MK2430 as a component of the MEDICS® system for medical locations.
Overview of the MK2430's features, display, LEDs, and acoustic signals.
Details the features of the MK2430, including display, text, bus technology, and alarms.
Information on different MK2430 variants, interfaces, and their specific features.
Safety precautions, especially regarding electric shock, before installation.
Guidance on installing the MK2430 in various enclosure types and mounting configurations.
Instructions and safety notes for connecting the MK2430 to power and the BMS bus.
Practical examples illustrating BMS bus connection and address settings for different system configurations.
Checklist of pre-operation checks to ensure correct installation and connectivity.
Steps for verifying the device's operation and connectivity after initial power-up.
Covers setting device parameters via TMK-SET software or the device menu.
Guidelines for routine checks, maintenance, and cleaning to ensure continued operation.
Lists recognized error messages, their descriptions, and recommended actions.
Provides a list of common malfunctions, their possible causes, and corrective actions.
Identifies and explains the function of the device's LEDs, LCD, and physical buttons.
Provides examples of display states for normal and fault conditions.
Details how to use the TEST button to check assigned devices and interpret test results.
Describes the initial startup sequence and display information.
Visual guide to navigating the device's menu structure and options.
Lists the main menu items and their corresponding functions and page references.
Explains how to access and view stored messages, acknowledgements, and timestamps.
Details the various configuration options available for the MK2430 device.
Describes how to set bus addresses for devices to display their alarm messages.
Explains setting bus addresses for devices used in test procedures.
Covers setting the operating behavior and alarm texts for digital inputs.
Details how to set the buzzer sound's frequency and repetition rate.
Explains how to configure common acknowledgement of alarms across multiple devices.
Instructions for setting the device's real-time clock, date, and format.
Guide for selecting the operating language for menus and messages.
Covers setting the device address and baud rate for BMS bus communication.
Details the operating mode and function for the optional alarm relay.
Instructions on changing the password and enabling/disabling password protection.
Information on accessing service settings and device status, intended for authorized personnel.
Options for controlling individual devices or the entire system, including resetting alarms.
How to set and control external devices connected to the BMS bus, including displaying their information.
Displays information about the device type, version, and last assignment transmission.
A table summarizing where individual parameters can be set.
Comprehensive technical specifications for the MK2430, including electrical data, display, and environmental conditions.
Information on product types, descriptions, and article numbers for ordering.
To Next Page
