Bender COMTRAXX MK2430 User Manual

Installation and connection
23
MK2430_D00129_02_M_XXEN/09.2019
4.2.2.1 Flush-mounting
The flush-mounting enclosure is already included in the scope of delivery of the
MK2430.
1. Insert the cardboard that has been supplied into the flush-mounting enclo-
sure to provide protection against pollution.
2. Insert the enclosure so that it is flush with the wall surface.
The flush-mounting enclosure must not be installed lopsidedly or warped, and must
not be installed too deep below the surface.
1
2

Bender COMTRAXX MK2430 Specifications

General

Brand	Bender
Model	COMTRAXX MK2430
Category	Measuring Instruments
Language	English