Menu mode: Operation and setting
64
MK2430_D00129_02_M_XXEN/09.2019
8.4.3.5 Settings menu 5: Buzzer
The buzzer will sound in the event of a warning or an alarm message. Setting of the
audio frequency and repetition rate to distinguish both buzzer sounds.
1. Exit Back to the main menu.
2. Warning
3. Alarm A variety of signals can be preset for "Warning" and "Alarm".
An individual buzzer sound can be selected via TMK-SET.
During the setting procedure the selected buzzer signal sounds and the LED lights up
or flashes.
8.4.3.6 Settings menu 6: Common acknowledgement
Setting indicating whether this MK2430 should respond (On) or not (Off) to the
acknowledgement of the buzzer (buzzer mute) initiated by pressing the " " button on
another MK… or TM… remote alarm indicator and operator panel.
Activating the common reset function can for example make it possible to
acknowledge (mute) an alarm (buzzer tone) on an MK… or a TM… located in a neigh-
bouring building from an MK2430 in a central location.
The alarm message itself will remain visible on the display until its cause has been
rectified.
1. Exit Back to the main menu.
2. Common ack.: Setting of the common acknowledgement for the internal
bus.
On
Buzzer can be acknowledged/muted externally.
Off Buzzer cannot be acknowledged/muted externally.
1.Exit
2.Warning: 5
3.Alarm: 2
To Next Page
Loading...
Need help?
General
