Menu mode: Operation and setting
65
MK2430_D00129_02_M_XXEN/09.2019
8.4.3.7 Settings menu 7: Clock
This menu is used to set the time, the date and the date format. These settings remain
stored for approx. 5 days following a power supply failure.
The clock switches automatically to Central European summertime (CEST) and
wintertime (CET). Reset the clock if the time differs from your local time following the
automatic switchover. The automatic switchover can be deactivated (menu item "5.
Summertime").
1. Exit Back to the main menu
2. Time Set the time (hours and minutes)
3. Date Set the date (according to the format indicated in line 4)
4. Format Select German (dd.mm.yy) or
American (mm/dd/yy)
5. Daylight sav. Setting for automatic switchover to Central European sum-
mertime:
Auto automatic switchover
Off no switchover
Time and date for the system can be set on any MK… or TM… panel. The
settings are transferred via the BMS bus to the master device (address 1),
which transfers the settings to all other MK… or TM… panels.
1.Exit (CEST)
2.Time: 17:45
3.Date: 21.09.11
4.Format: dd.mm.yy
To Next Page
Loading...
Need help?
General
