Technical data
77
MK2430_D00129_02_M_XXEN/09.2019
Colours
Front foil........................................................................... RAL 7035 (light grey); RAL 7040 (basalt grey)
Marking........................................................................................................ RAL 5005 (ultramarine blue)
Front plate ............................................................................................................... RAL 7035 (light grey)
Switching elements (MK2430…-11 only)
Number .....................................................................................................................1 changeover contact
Function ............................................................................................................................. programmable
Operating principle ...................................................................... N/C or N/O operation (programmable)
Electrical endurance under rated operating conditions, number of cycles.................................... 10,000
Contact data acc. to IEC 60947-5-1
Utilisation category..............................................................AC-13...................... AC-14.................DC-12
Rated operational voltage ......................................................24 V......................... 24 V....................24 V
Rated operational current.........................................................5 A........................... 3 A ......................1 A
Minimum contact rating.......................................................................................1 mA at AC / DC > 10 V
Environment/EMC
EMC immunity ........................................................................................................ acc. to EN 61000-6-2
EMC immunity ........................................................................................................ acc. to EN 61000-6-3
Classification of climatic conditions acc. to IEC 60721:
Stationary use ........................................................................................................................................3K5
Transport................................................................................................................................................2K3
Long-term storage.................................................................................................................................1K4
Operating temperature..........................................................................................................-5…+55 °C
Classification of mechanical conditions acc. to IEC 60721:
Stationary use ...................................................................................................................................... 3M4
Transport.............................................................................................................................................. 2M2
Long-term storage............................................................................................................................... 1M3
Connection
Connection....................................................................................................... pluggable screw terminals
Connection properties (supply voltage, BMS bus)
Connection of single conductors:
rigid/flexible/conductor sizes.....................................................0.2…2.5/0.2…2.5 mm
2
/AWG 24-12
flexible with ferrules, without/with plastic sleeve 0.25…2.5/0.25…2.5 mm
2
Multi-conductor connection (2 conductors with the same cross section):
rigid/flexible....................................................................................................... 0.2…1/0.2…1.5 mm
2
flexible with ferrule without plastic sleeve........................................................................ 0.25…1 mm
2
flexible with TWIN ferrule with plastic sleeve ................................................................ 0.5 … 1.5 mm
2
To Next Page
Loading...
Need help?
General
