Safety instructions
11
isoxx1685Dx-x25_D00272_07_M_XXEN/09.2022
2. Safety instructions
2.1 General safety instructions
Part of the device documentation in addition to this manual is the enclosed "Safety instruc-
tions for Bender products".
2.2 Work activities on electrical installations.
If the device is used outside the Federal Republic of Germany, the applicable local standards
and regulations must be complied with. The European standard EN 50110 can be used as a
guide.
Read the operating manual before starting to mount, connect and com-
mission the device. After successful commissioning, keep the manual within
easy reach for future reference.
Only qualified personnel are permitted to carry out the work necessary to
install, commission and run a device or system.
DANGER
Risk of electrocution due to electric shock!
Touching live parts of the system carries the risk of:
• An electric shock
• Damage to the electrical installation
• Destruction of the device
Before installing and connecting the device, make sure that the
installation has been de-energised. Observe the rules for working on
electrical installations.
To Next Page
Loading...
