Commissioning
31
isoxx1685Dx-x25_D00272_07_M_XXEN/09.2022
6.3 Initial commissioning
Follow the instructions of the commissioning wizard on the display.
Use the device buttons to navigate. For a description of the device buttons, refer to "Device
buttons" on page 21.
6.3.1 Setting the language
The language selected here will be used in the menu and for device messages.
6.3.2 Setting date and time
Alarm messages in the history memory and the insulation resistance value over time can only
be assigned correctly to the isoGraph when date and time are set correctly.
Language
x.x.x
• Deutsch
o English
o ...
Date
x.x.x
28.07.2016
Min. 1
Max. 12
Commissioning
x.x
Please set
the current
date and time.
x/xx
To Next Page
Loading...
