Settings
63
isoxx1685Dx-x25_D00272_07_M_XXEN/09.2022
8.2 (6.2.3) Summer time
Summer time can be considered in the following settings:
8.2 (6.2.4) Date
Based on the selected date format, the current date can be set.
8.2 (6.2.5) Format (date)
Select the date format to be displayed:
8.2 (6.3) Interface
Set the parameters for connection of other devices to the ISOMETER® in the interface menu.
8.2 (6.3.1) Mode
Set the parameters for the communication with other devices via the BMS bus or Modbus RTU
•off No automatic change between summer time and standard time.
•DST Daylight Saving Time
Automatic change between summer time and standard time accor-
ding to North American regulation.
North American summer time begins on each second Sunday in
March at 02:00 local time by setting the clock forward by one hour
from 2:00 to 03:00 local time. Summer time always ends the first Sun-
day in October at 03:00 local time by setting the clock back one hour
from 3:00 to 2:00.
•CEST Central European Summer Time
Automatic change between summer time and standard time accor-
ding to Central European regulation.
Central European summer time begins on each last Sunday in March
at 02:00 CEST by setting the clock forward by one hour from 2:00 to
03:00. Central European summer time always ends on the last Sun-
day in October at 03:00 CEST by setting the clock back one hour
from 3:00 to 2:00.
•dd.mm.yy day, month, year
•mm-dd-yy month, day, year
•Mode
•BMS
•Modbus RTU
•BMS
•Modbus RTU
To Next Page
Loading...
Need help?
General
