Bender ISOMETER iso1685DP-425 User Manual

Settings
43
isoxx1685Dx-x25_D00272_07_M_XXEN/09.2022
8.1.1 Menu item EDS (isoxx1685DP only)
The settings of the ISOMETER® are explained in section 8.2 in the order of the device menu.
2. EDS 1. General 1. Mode
only for following devices: 2. Current
- iso1685DP 2. Scan for channels
- isoLR1685DP 3. Enable channel
4. Group settings 1. Channel (select 1 … x) 1. CT
2. CT Monitor
3. IΔL Response value
4. IΔn Response value
2. Outputs 1. Common relay 1. TEST
2. Relay mode
3. Function 1
4. Function 2
5. Function 3
2. Channel relay … see 1.
3. Buzzer 1. TEST
2. Function 1
3. Function 2
4. Function 3
4. Digital Output … see 3.
3. Digital Input 1. Mode
2. t(on)
3. t(off)
4. Function
4. Device settings 1. System type
2. Frequency
3. Trigger
4. Fault memory
5. Channel 1. Channel (select 1 … x) 1. Name
2. CT monitor
3. IΔL Response value
4. IΔn Response value
6. Outputs 1. Common relay 1. TEST
2. Relay mode
3. Function 1
4. Function 2
5. Function 3
2. Channel relay … see 1.
3. Buzzer 1. TEST
2. Function 1
3. Function 2
4. Function 3
4. Digital Output … see 3.
7. Inputs 1. Input (select 1 … x) 1. Mode
2. t(on)
3. t(off)
4. Function
8. Device 1. Device (select 1 … x) 1. Name
2. Trigger
3. Memory
9. Service

Bender ISOMETER iso1685DP-425 Specifications

General

Brand	Bender
Model	ISOMETER iso1685DP-425
Category	Measuring Instruments
Language	English