Bender ISOMETER iso1685DP-425 - Page 60

Settings
60
isoxx1685Dx-x25_D00272_07_M_XXEN/09.2022
8.2 (2.6.2.1) TEST
See chapter 8.2 (2.4.2.1.1) "TEST”.
8.2 (2.6.2.2) Relay mode
See chapter 8.2 (2.4.2.1.2) "Relay mode”.
8.2 (2.6.2.3) Function 1
See chapter 8.2 (2.4.2.1.3) "Function 1”.
8.2 (2.6.2.4) Function 2
See chapter 8.2 (2.4.2.1.3) "Function 1”.
8.2 (2.6.2.5) Function 3
See chapter 8.2 (2.4.2.1.3) "Function 1”.
8.2 (2.6.3) Buzzer
In this menu, each buzzer can be configured. See also chapter 8.2 (2.4.2.3) "Buzzer”.
8.2 (2.6.3.1) TEST
See chapter 8.2 (2.4.2.1.1) "TEST”.
8.2 (2.6.3.2) Function 1
See chapter 8.2 (2.4.2.1.3) "Function 1”.
8.2 (2.6.3.3) Function 2
See chapter 8.2 (2.4.2.1.3) "Function 1”.
8.2 (2.6.3.4) Function 3
See chapter 8.2 (2.4.2.1.3) "Function 1”.
8.2 (2.6.4) Digital output
In this menu, each digital output can be configured. See also chapter 8.2 (2.4.2.4) "Digital out-
put”.
8.2 (2.6.4.1) TEST
See chapter 8.2 (2.4.2.4.1) "TEST”.
8.2 (2.6.4.2) Function 1
See chapter 8.2 (2.4.2.1.3) "Function 1”.
8.2 (2.6.4.3) Function 2
See chapter 8.2 (2.4.2.1.3) "Function 1”.
8.2 (2.6.4.4) Function 3
See chapter 8.2 (2.4.2.1.3) "Function 1”.