3 Installation and Settings
10 / 64
3.3.2 Running Status
Click “Main Page”, jump to eq uipment information page, includi ng network status ,
WLAN status, system status and equipmen t info rmation, as shown in the figure
below:
Figure 8 System Status
3.4 Configuration Wizard
3.4.1 Select Bridge-AP Mode
Bridge-AP: Bridge-Access Point Mode. WLAN as AP, can be connected with the
Ethernet.
Open “Configuration→Configuration Wizard”, as shown in the figure below:
Figure 9 Bridge-AP Mode
Click “Next” to select work mode, as shown in the figure below: