5 Equipment Check and Troubleshooting
53 / 64
5 Equipment Check and Troubleshooting
5.1 The correct installation and configuration of BXM2/5
equipment
1、Install and fix BXM2/5 at high place outdoor as requested, as shown in the
figure below:
User BXM2 /5 installat ion is not steady, after long-term wind, the wooden rail
become d eformed, or BXM2/5 direction is chang ed, it will reduce t he signal
receiving c apability , which resulted in unnecessary maintenance. Therefo re, the
antenna di rection sh ould be fixed according to signal strength strictly, in our
BXM2/5 configuration interfac e, there are timely signal strength display, the user
should adjust the antenna to t he best position where can receive the strongest
signal.
Figure 84 Equipment Installation
2 、 To ensure that there is no tall and dense buildings or trees around the
equipment, so it can receive high-intensity signals. If beyond the available access
distance, there are tall and dense buildings or trees, the users will have troubles in
maintenance, due to a long di stance, the hidden users will reduce the whole
network efficiency, as shown in the figure below:
To Next Page
Loading...