3 Installation and Settings
14 / 64
DHCP：Open ipv4 DHCP function , Fill in a starting subnet number, set the l ease of
IP address.
3.4.2 Select Bridge-Station Mode
Bridge-Station：Under Bridge-User mode, WLAN as the termi nal side ca n link to
other AP (root AP), and link to Ethernet bridge. In this mode, the linked AP (root AP)
must open WDS function.
Bridge-Station basic configuration is shown in the figure below:
Figure 16 Bridge-Station Mode
Click “Next” to select work mode, as shown in the figure below:
Figure 17 Bridge-Station Mode
Access to the related work mode to make basic configurations, as shown in the
figure below:
To Next Page
Loading...